PC361 programs to SP4-7

Questions about your PC3/PC3K/PC3LE/SP4/SP5 keyboard? Somebody might have the answers here.

PC361 programs to SP4-7

Postby marku » Wed Apr 04, 2018 1:46 pm

I had my lower board SP88 die last night (both midi and onboard) and looking at quick replacement used SP4-7. I have read that the setups and programs I already have from my PC361 saved via USB to computer could be imported and work with the SP4-7 using SP4-7 USB and related SP4 software, including my KB3 setups from PC361.

Is this correct? If so I am going to pull the trigger ASAP on that used SP4 as I have gig this weekend.

Sorry if this is the wrong website to post this question to...

Thanks in advance!
marku
House mouse
House mouse
 
Posts: 11
Joined: Tue Jan 09, 2018 9:37 pm
Has thanked: 0 time
Have thanks: 1 time

Re: PC361 programs to SP4-7

Postby RafalSC » Fri May 25, 2018 7:14 am

Hello
Is it possible to load one program into the USER bank of SP 4-8 from Kurzweil PC LE ?
I have all the PC LE voices (prog.PLE).

I want to load the X.PLE program into USER program 1. Then the Y.PLE program into USER program 2, then load
the Z.PLE program into USER program 3 etc ...
I would like to have "the best programs" in the user's bank of SP 4 with all factory Kurzweil PC LE programs. :)

Or do I have to load the ALL USER bank? :(
RafalSC
House mouse
House mouse
 
Posts: 5
Joined: Wed Jul 22, 2015 3:49 pm
Has thanked: 0 time
Have thanks: 0 time

Re: PC361 programs to SP4-7

Postby hipogrito » Fri May 25, 2018 7:58 am

Hi,

The SP4 Loads a whole file.
Regards,

Fran
http://www.hipogrito.com
Yes I work at Kurzweil but anything I write here is just on behalf of myself, not the company.
User avatar
hipogrito
Site Admin
 
Posts: 1015
Joined: Sat Feb 26, 2011 12:43 pm
Has thanked: 1340 times
Have thanks: 349 times

Re: PC361 programs to SP4-7

Postby RafalSC » Fri May 25, 2018 12:50 pm

hipogrito wrote:Hi,

The SP4 Loads a whole file.


And if the whole program is one program?
RafalSC
House mouse
House mouse
 
Posts: 5
Joined: Wed Jul 22, 2015 3:49 pm
Has thanked: 0 time
Have thanks: 0 time


Return to Kurzweil Discussion

Who is online

Users browsing this forum: No registered users and 2 guests