KB3 Jazz organ B3 [SP6/ PC3]

Do you need the sound of a song? Ask for it here.

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby thin_i » Wed May 01, 2019 7:18 am

kurzweilking wrote:thin_i
Thanks for uploading the B3 sound , If of any interest im working on a set of Wersi Organ sounds and Hammond H100 / x66
I will gladly share these once completed - let me know if interested ,
Cheers :)


Hi,
I’m always interested in new sounds!

Thanks,

Thin_i
thin_i
Disco dog
Disco dog
 
Posts: 70
Joined: Thu Aug 31, 2017 12:23 pm
Has thanked: 6 times
Have thanks: 55 times

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby waidelh » Thu Aug 01, 2019 11:34 am

Hi thin_i,
Love your JAZZ B3, one of the best I have in my Forte. The Tone, C3 Chorus, and Percussion, are right on. I wouldn't mind the Leslie doppler effect to be a bit stronger, but that's just my taste since I used to sit in front of my Leslie. Any suggestions? Thanks for uploading your file.

For this message the author waidelh has received thanks:
thin_i (Wed Aug 07, 2019 4:45 am)
Rating: 1.39%
 
waidelh
Basement roach
Basement roach
 
Posts: 3
Joined: Sat Mar 19, 2011 9:58 am
Has thanked: 1 time
Have thanks: 2 times

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby thin_i » Fri Aug 02, 2019 8:10 am

waidelh wrote:Hi thin_i,
Love your JAZZ B3, one of the best I have in my Forte. The Tone, C3 Chorus, and Percussion, are right on. I wouldn't mind the Leslie doppler effect to be a bit stronger, but that's just my taste since I used to sit in front of my Leslie. Any suggestions? Thanks for uploading your file.


FILE UPDATE!: Corrections to the rotary speaker fx chain: No more unwanted digital distortion with "all out" drawbar setting. An erroneous mic panning setting also corrected.

Hi waidelh,
Thank you for your kind words. The Leslie in the program is "mild" intentionally so it can be used in the studio environment. In my opinion if the Leslie sim fx is too strong it is hard to get the rotary sound to sit in a mix (unless you play and record through a keyboard or a guitar amp and can move the microphone(s) away from the speaker cone to tame the tremolo created by a rotary speaker fx).

Personally I use more "stronger" sounding rotary fx chains in my kb3 programs when I play live (I mostly play with pop and rock bands).

Attached you'll find the same Jazzy B3 program (named Thin_i Jazzy B3 2) but now with a slightly more prominent rotary speaker fx.

If you still need more prominent rotary speaker sound you can adjust the Low Trem and Hi Trem parameters in the kb3b fx. You can also adjust the LowResonate, LoRes Dly and HiResonate, HiRes Dly parameters to get the sound you're after.

Feel free to give a comment about the "new" program.

Best regards,

Thin_i
Attachments
THINIB32.PC3
Thin_i Jazzy B3 2 - Fixed program file! - Slightly more prominent rotary speaker fx
(2.16 KiB) Downloaded 83 times
Last edited by thin_i on Mon Sep 02, 2019 10:29 pm, edited 4 times in total.
thin_i
Disco dog
Disco dog
 
Posts: 70
Joined: Thu Aug 31, 2017 12:23 pm
Has thanked: 6 times
Have thanks: 55 times

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby waidelh » Mon Aug 05, 2019 11:07 am

Hi Thin_i,
Thank you for the programming tips and the updated Jazzy B3 sound file. I like the doppler effect better. This is a very good organ sound. Very much appreciated.
waidelh
Basement roach
Basement roach
 
Posts: 3
Joined: Sat Mar 19, 2011 9:58 am
Has thanked: 1 time
Have thanks: 2 times

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby neilcrewe » Mon Sep 02, 2019 9:54 am

Hi Thin_i,
Is there any chance you could create a version of this for an SP4 keyboard? You probably can't create the same Leslie effect on a PC4, but I'd very much like to have the basic program.
neilcrewe
House mouse
House mouse
 
Posts: 13
Joined: Sun Oct 21, 2012 9:54 am
Has thanked: 5 times
Have thanks: 0 time

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby thin_i » Mon Sep 02, 2019 1:29 pm

neilcrewe wrote:Hi Thin_i,
Is there any chance you could create a version of this for an SP4 keyboard? You probably can't create the same Leslie effect on a PC4, but I'd very much like to have the basic program.


Hi neilcrewe,

The program should work fine on your SP4 as it only uses 10 fx units (7 units for rotary fx and 3 for chamber reverb).
Download the program and change the file extention to .sp4 (or to whatever it needs to be).

Any help?

Thin_i
thin_i
Disco dog
Disco dog
 
Posts: 70
Joined: Thu Aug 31, 2017 12:23 pm
Has thanked: 6 times
Have thanks: 55 times

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby neilcrewe » Tue Sep 03, 2019 1:09 pm

Hi and thanks,
I've loaded the program successfully. It turned out I didn't have any empty program slots. It loaded after I deleted a few programs, and sounds great! I haven't got the Leslie working yet, but I may have to change the controls to get it working? I'll play around a bit and see if I can get it working.
Thanks again.
neilcrewe
House mouse
House mouse
 
Posts: 13
Joined: Sun Oct 21, 2012 9:54 am
Has thanked: 5 times
Have thanks: 0 time

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby thin_i » Tue Sep 03, 2019 1:51 pm

Hi,
The rotary speaker fx might not work correctly on SP4 because I’ve programmed the PC3’s SW button to activate the rotary stop mode.
The SP4 doesn’t have the SW button or does it?
If needed I can upload the same program + fx without the rotary stop mode feature.

Regards,

Thin_i
thin_i
Disco dog
Disco dog
 
Posts: 70
Joined: Thu Aug 31, 2017 12:23 pm
Has thanked: 6 times
Have thanks: 55 times

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby neilcrewe » Wed Sep 04, 2019 6:33 am

Hi,
Yes please, could you provide another version of the program with the Leslie not stopped. I can probably manage to send the command via MIDI, but it would be simpler for you to do this?
Thanks again
neilcrewe
House mouse
House mouse
 
Posts: 13
Joined: Sun Oct 21, 2012 9:54 am
Has thanked: 5 times
Have thanks: 0 time

Re: KB3 Jazz organ B3 [SP6/ PC3]

Postby thin_i » Wed Sep 04, 2019 12:12 pm

Hi,
Here's a version of Thin_i Jazzy B3 2 but without the rotary speaker Brake FX Mod. Apparently the Brake FX Mod (programmed for PC3) caused the rotary speaker fx to initialize in brake mode which made the program somewhat useless in SP4.

Hope this new kb3 program JAZZB3SP will fix the issue.

Feel free to comment,

Thin_i
Attachments
JAZZB3SP.PC3
JAZZB3SP - Thin_i Jazzy B3 2 for SP4 - A kb3 program without the 'Brake' FX Mod
(2.16 KiB) Downloaded 54 times
thin_i
Disco dog
Disco dog
 
Posts: 70
Joined: Thu Aug 31, 2017 12:23 pm
Has thanked: 6 times
Have thanks: 55 times

PreviousNext

Return to Sounds Requests

Who is online

Users browsing this forum: No registered users and 2 guests