KB3 mode sustain pedal.

Questions about your PC3/PC3K/PC3LE/SP4/SP5 keyboard? Somebody might have the answers here.

KB3 mode sustain pedal.

Postby hebert » Sun Jul 28, 2019 9:15 pm

Does anyone know how to put sustain on Harmmond Organ in KB3 mode.

I want to play piano and organ and support both with the sustain pedal.
hebert
House mouse
House mouse
 
Posts: 16
Joined: Sun Jun 23, 2019 1:34 am
Has thanked: 0 time
Have thanks: 1 time

Re: KB3 mode sustain pedal.

Postby thin_i » Mon Jul 29, 2019 12:58 pm

Hi hebert,

I’m assuming you are going to do your layered piano/organ in Setup mode.
First you need to edit the organ program you’re going to use.
Press Edit in kb3-mode and navigate to page called MISC. From that page you’ll find a parameter called Sustain. Set the Sustain On. Now your sustain
pedal will control both the organ sustain and Leslie (rotary) fast/slow-setting.
If you don’t want the sustain pedal to control the Leslie speed then set the
LesliePedal-parameter to None.
Save your edited program and use it in your setup.

Any help?

thin_i
thin_i
Disco dog
Disco dog
 
Posts: 70
Joined: Thu Aug 31, 2017 12:23 pm
Has thanked: 6 times
Have thanks: 53 times

Re: KB3 mode sustain pedal.

Postby hebert » Wed Jul 31, 2019 8:48 am

Thank you so much friend.
hebert
House mouse
House mouse
 
Posts: 16
Joined: Sun Jun 23, 2019 1:34 am
Has thanked: 0 time
Have thanks: 1 time

Re: KB3 mode sustain pedal.

Postby R&BComboSideman » Tue Oct 22, 2019 6:53 pm

I'm new to my PC3K8. I'm trying to create a setup with acoustic piano on the left hand side of a split and a KB3 organ program on the right hand side. Almost everything is working and I have Foot Switch 1 controlling sustain for the piano. I can't figure out how to make Foot Switch 2 control the Leslie speaker effect speed. Any help would be appreciated.
R&BComboSideman
Basement roach
Basement roach
 
Posts: 2
Joined: Tue Oct 22, 2019 6:45 pm
Has thanked: 1 time
Have thanks: 0 time

Re: KB3 mode sustain pedal.

Postby delaware dave » Fri Oct 25, 2019 12:29 pm

page 6-7 in the original manual shows that the rotating speaker is controlled via CC#68. So assign footswitch #2 to control CC#68 and see what happens.
57 Hammond B3; 69 Hammond L100P; 68 Leslie122; MS Low Pro/Pro 3T; Kurzweil PC3; GEM Equinox 88 and 76 key versions; Voce V5+; Neo Vent; EV ELX112P; GSI Gemini Desktop Module; 67 Howard Combo Organ; http://www.dyinbreedband.com

For this message the author delaware dave has received thanks:
R&BComboSideman (Tue Oct 29, 2019 12:44 pm)
Rating: 1.39%
 
User avatar
delaware dave
House of Blues alligator
House of Blues alligator
 
Posts: 151
Joined: Sun Jul 24, 2011 8:52 pm
Has thanked: 0 time
Have thanks: 41 times

Re: KB3 mode sustain pedal.

Postby R&BComboSideman » Tue Oct 29, 2019 12:39 pm

Thanks very much for your help. I got it working just by finding a factory setup that used a foot switch (other than the sustain pedal) for the Leslie speaker speed control, and basing my setup on that one. By the way, I also own a 1969 L100 (cabinet model L112) and a similar vintage Leslie Model 251/351. I'm enjoying the excellent B3 emulation in the PC3K. Thanks again.
R&BComboSideman
Basement roach
Basement roach
 
Posts: 2
Joined: Tue Oct 22, 2019 6:45 pm
Has thanked: 1 time
Have thanks: 0 time


Return to Kurzweil Discussion

Who is online

Users browsing this forum: No registered users and 2 guests