The manual say you can select a drumkit program or Self or None.
In my PC3le (Last S.O. inside ) no mater wich are selected I get allways the same values for the pads:
Notes 49, 58, 42 ......
The only way I have to change is Setup>Program 126 Internal voices.
can anyone say me how to do that the manual say ?
Another question: Why in the software editor, in program mode lack the drumpad editor? Synth editor have a screen to this.
It's been awhile since you asked this question, and I'm not really sure what you're asking, but I'll try:
The notes that the pads play in program mode is set inside each program.
- - select a program
- press Edit
- press the PADS soft-button
- the highlighted entry contains the drum program number and name
- you can change the drum program there
- use the cursor left/right/up/down buttons (on the ring around the number-wheel)
- - to move to the pad boxes
- to move between the pad boxes
- to move to and from the drum program, the line of pads, the FX send[/list:u:1fx3doe4]
- move the highlight to a pad box
- now you can change the note which that selected pad plays
- - enter it numerically (a series of numbers, then the Enter button)
- use the +/- buttons
- use the number wheel
- or press and hold Enter and strike a key on the keyboard[/list:u:1fx3doe4]
[/list:u:1fx3doe4]
(that last method - you'll hear your program play a note, not the drum program)
Why in the software editor, in program mode lack the drumpad editor?
That's all they got around to writing? Maybe there was no need for the PC editor to have it when the PC3LE could already do it, and do it easier.
It's also "missing" the arpeggiator parameters for a program.
I hope this helps.
K2000R 3.87J | MBP 2012 macOS 10.14.6
