Hi all.
Probably an easy fix to this, but in setup mode I want to switch between 2 sounds using the CC1 pedal to phase in 1 sound whilst phasing out another -effectively crossfading between the two. I've tried adjusting the entry and exit levels to be opposite e.g. entry-none / exit-127 on one channel and entry-127 / exit-none on the other, but this doesn't seem to do it.
Hopefully one of you wizards can help me out! 
Kurzweil PC3 + Kore64, Kurzweil PC88MX, Roland Fantom XR, Korg O5/RW, Yamaha S90XS, Nord Rack 2X.
What # do you have the CC1 assigned to? 7 or 11? You've got me wondering if there is a Midi # for crossfader. Why don't you post the setup and sounds you are using. There has to be a way to crossfade.
I've got the CC1 assigned to 7. I"m still working on the sound (the intro for Funeral for a friend by Elton John) but will post it as soon as I'm done. I'm wanting to crossfade from the brass part to the phased strings.
Kurzweil PC3 + Kore64, Kurzweil PC88MX, Roland Fantom XR, Korg O5/RW, Yamaha S90XS, Nord Rack 2X.
Assign it to CC11 - this will keep the relative volumes of zones in the setup the same, but you'll get the crossfade anyways. Entry/exit values are static and only happen when you load a setup or switch to a next one... they don't crossfade in realtime. You need to use a controller for that, so modwheel should be perfect for the job. Or a CC pedal.
For both zones, map the modwheel to CC11. For the zone you want to be played when the modwheel is down, set Scale to -100% and Add to 127. That will do it. What this does is it flips the CC values to negative range (0 to -127) and this is then added (or rather, subtracted) to the value of 127, effectively reversing the behaviour of the controller for this zone.
Thanks so much! That's really helpful!!
Kurzweil PC3 + Kore64, Kurzweil PC88MX, Roland Fantom XR, Korg O5/RW, Yamaha S90XS, Nord Rack 2X.
