Last seen: Apr 18, 2026
You won't be able to effectively adjust the release time in the setup, you'll have to adjust the release in the program itself. Intensely read pages ...
It could have been static electricity or just electrical. When I turned my PC3 on last night at a show the program had a ton of reverb on it. I switc...
The issue with using a VAST organ vs. KB3 for the solution is that the VAST organ doesn't have phase-locked notes which is why I didn't recommend a VA...
If I had to take a guess the tube sound you are talking about is actually the percussion sound. Percussion on a real hammond is only triggered one no...
I don't use soundtower, but editing the PC3 from its screen go to the layer page and set the SusPdl to 'On'. P.S. Soundtower has been reported as be...
Buck, before you do anything, backup everything you have before you use soundtower. Soundtower has a history to corrupting patches and leaving the PC...
I think I remember one that slides down rather than up. I'll have to look for it but it is one of the standard ones delivered. You would just have ...
Can you post an audio example somewhere where we can here it? Also, swap out your audio cord with another one and see if it goes away.
Try adjusting the program' s swell in program mode rather than trying to adjust the setup. Edit the program in program mode, find where the mod wheel ...
If the mod wheel is assigned to control the swell then go to that assignment and adjust the mod wheel's minimum assignment range to no swell rather t...
Amp envelopes could be the culprit. Assuming that you have a PC3 series go to the original owners manual and read pages 6-41through 6-45 so that you ...
Sounds like dirty key contacts.
Overwrite or merge will put things back exactly as they were. If the symptom reappears then it could be something contained in one or more of the pro...
I would try a hard reset and reload the OS.
Go to midi mode and check the settings on the recv page. Midi mode s/b set to multi. Program change mode s/b set to extended and localkbd should be ...